Rover V8 4 x Weber 45DCOE Cross-ram

Description

Rover V8 4 x Weber 45DCOE Crossram

Weber 4 x 45DCOE Crossram performance kit for Rover V8 3.5 / 3.9

Produced in conjunction with one of the UK’s leading Rover V8 specialists, PRV402
features a superb quality UK manufactured crossram intake manifold and 4 genuine Spanish Weber 45DCOE carburettors to produce phenomenal power in applications where space is at a premium.

Please note that fitting this kit will mean that the stock oil filler can not be used, therefore it is recommended that later, Rover SD1 V8 rocker covers are used, as this will move the oil filler to one end.

The kit is supplied with thermostat housing and a new throttle cable and custom designed throttle quadrant to ensure smooth and reliable throttle pedal action.

The height of the kit from the top of the intake port to the highest point on the carburettors, is 200mm, and the overall width including the standard length 45DCOE air horns, is 500mm

The 45DCOEs in the kit are supplied with the following “starting point” calibration which will allow the engine to start and run.

Venturi               36mm

Auxilliary venturi  4.5

Main jet              145

Air corrector         155

Emulsion tube      F16

Idle jet               55F8

Pump jet             45

To achieve maximum power, driveability and efficiency, we recommend that you have the carburettors calibrated on a rolling road.

Please note that, owing to our policy of continuous improvement, kit contents may be subject to change with our prior notice.

*This kit is made to order and usually has a 4 week lead time.

 

JDA-PRV402